Carpenters in Port Talbot, Neath Port Talbot

Stud walls in Port Talbot: split a room, box in pipes or frame an extension, with a free quote

A stud wall is a frame of timber covered with plasterboard. Tell us what you want built and when to ring, and a local carpenter phones you then with a free quote.

Free carpentry quote, with a call back

Four boxes and a call back time. About a minute.

By sending this form you agree to your details being shared with a local carpenter so they can contact you. See our privacy notice.

  • Rooms divided with a timber stud wall
  • Pipes and boilers boxed in
  • Timber work for home extensions
  • Plastering and electrics can follow

A room that does not fit your family

One big bedroom that two children share and fight over. A back room that would make a decent office if it had a wall. A waste pipe that runs down the corner of the kitchen where nobody wants to look.

A stud wall solves each of these without bricks or mortar. It goes up in a day or two and can be plastered and painted like any other wall.

Say what you want built and why, then pick the time for the call. The carpenter who rings will price it for free.

From form to free quote in three steps

  1. Tell us the job

    Type your name, number and area, then say what needs doing in your own words. Sizes help, for example the number of doors, the length of a fence or the size of the loft.

  2. Pick when to be rung

    Say when the call should come. A carpenter working near you phones then, asks a few questions and usually offers to come and look.

  3. Weigh up the price

    You get a free quote. Get it on paper, take your time, and say yes only if you are happy. Asking costs nothing.

How a stud wall is made

A carpenter fixes a timber frame to the floor, ceiling and side walls. Studs stand upright at set spacing, and plasterboard is screwed to both faces. Insulation can go in the gap for sound.

Walls that carry weight from above are different. Never take out or alter a load bearing wall without advice, because a mistake can bring part of the house down. A wall that is only a partition can usually be built or removed more easily, but check first.

Stud wall prices

One cost guide gives 800 to 1,000 pounds for a standard timber stud wall 3 metres wide and 2.4 metres high, materials and labour together. It says materials cost 200 to 400 pounds, and tradespeople charge 150 to 250 pounds a day. Plastering the wall adds 150 to 200 pounds and recessed lights or sockets 275 to 450 pounds.

Guide price for a stud wall

The guide figure is for a standard sized wall.

Get a free price for this job

Four boxes and a call back time. About a minute.

By sending this form you agree to your details being shared with a local carpenter so they can contact you. See our privacy notice.

All the guide prices side by side

JobUK guide price
Stud wall builtA standard timber stud wall 3 metres wide and 2.4 metres high, materials and labour. Plastering and painting come on top.£800 to £1,000

Each figure below is a UK guide price taken from a published UK cost guide. None of them is a quote. Real prices vary with the house: its sizes, the timber chosen, how easy it is to reach and what is found once work begins.

Timber framing for extensions

Carpenters also work on the timber parts of extensions: floor joists, roof timbers and stud walls inside the new shell. Mention on the form if the job is part of a bigger build and whether plans have been drawn up.

Extensions and larger alterations need building regulations approval, and some need planning permission. In Wales, apply to the council that covers your address.

Walls in Port Talbot homes

In older terraces the rooms are often small already, so a stud wall can make them smaller. Measure the room and picture the doors and windows before you divide it. If you split a bedroom in two, think about where the window, the light and the heating will go for each half.

Questions to settle before building

Think about doors. A new wall that splits a room often needs a new door, and the door needs a frame. Decide where it goes before the frame is built, and say if the carpenter should supply the door.

Think about heating and light. Radiators, sockets and light switches may need to move. A carpenter can build the frame around them, but an electrician or heating engineer should do any work on the wiring or pipes.

Think about sound. A normal stud wall carries noise easily. If it is to separate a bedroom from a busy living room, ask for insulation inside the frame and a thicker board.

What you can count on

  • Free to ask. Sending the form costs nothing and you are never tied in. You can say no to any price.
  • A short form. Name, phone number, which part of town and what needs doing. No email address and no house number needed.
  • Prices from published guides. Each price shown was read from a published UK cost guide.
  • Your details are used for one thing. They are used so a carpenter can ring you about your job. They are not sold.

Common questions

Will I need building regulations approval for a stud wall?

Often not for a simple partition, but it depends on the job, for example if it blocks an escape route or changes how a room is used. Ask the council's building control team if you are unsure.

Can a stud wall be soundproofed?

Yes. Insulation inside the frame and a second layer of plasterboard cut down noise. Say you want that when you describe the job.

Get the wall built

A bigger family or a working from home plan does not wait for a convenient moment. The longer you live around the problem, the longer it costs you in comfort.

Tell us what you want built and where in Port Talbot you live. Asking is free.

Free carpentry quote, with a call back

Four boxes and a call back time. About a minute.

By sending this form you agree to your details being shared with a local carpenter so they can contact you. See our privacy notice.

Get a free quote