Carpenters in Port Talbot, Neath Port Talbot
Loft boarding in Port Talbot: a floor up there for storage, with a free quote
Loft boarding means laying boards across the ceiling joists so you can walk and store things safely. Give the rough size and a time that suits, and a local carpenter phones you then with a free quote.
- Boards laid over the joists for storage
- Raised frames where there is deep insulation
- Hatches and ladders fitted or moved
- A lamp and light switch can be added
A loft you cannot use
The spare room is full of boxes. The suitcases are on top of the wardrobe. You know there is a whole loft over your head, but you cannot put a foot up there without going through the ceiling.
Ceiling joists are made to hold up a ceiling, not to walk on. Boarding turns that space into somewhere you can use.
Give the size of the loft and choose your time for the call. The carpenter who rings will give you a price at no cost.

From form to free quote in three steps
Tell us the job
Type your name, number and area, then say what needs doing in your own words. Sizes help, for example the number of doors, the length of a fence or the size of the loft.
Pick when to be rung
Say when the call should come. A carpenter working near you phones then, asks a few questions and usually offers to come and look.
Weigh up the price
You get a free quote. Get it on paper, take your time, and say yes only if you are happy. Asking costs nothing.
How a loft is boarded
Chipboard or similar loft boards are screwed down across the joists, so the load is spread. A plain board is laid straight on the joists, which is fine where the insulation between them is thin.
Modern homes tend to have a deep layer of insulation. Board down onto it and you squash it, which makes it work less well. In that case a carpenter fits a raised frame, which holds the boards up above the insulation. One cost guide gives about 1,350 pounds for a raised system in a 15 square metre loft.
Loft boarding prices
One cost guide puts standard chipboard loft boarding at about 70 pounds a square metre, including materials and labour, within a range of 50 to 90 pounds. It lists extras too: a pull-down aluminium ladder at around 377.50 pounds, moving a hatch and making good at about 405 pounds, and quilt insulation at around 10 pounds a square metre.
Guide price for loft boarding
The loft figure assumes a 15 square metre space, using the guide's own price for each square metre.
Each figure below is a UK guide price taken from a published UK cost guide. None of them is a quote. Real prices vary with the house: its sizes, the timber chosen, how easy it is to reach and what is found once work begins.
All the guide prices side by side
| Job | UK guide price |
|---|---|
| Loft boardingPlain chipboard boarding over a 15 square metre loft, worked out from the guide's 50 to 90 pounds a square metre, with 70 pounds as the average. | £750 to £1,350typical about £1,050 |
Each figure below is a UK guide price taken from a published UK cost guide. None of them is a quote. Real prices vary with the house: its sizes, the timber chosen, how easy it is to reach and what is found once work begins.
Before the boards go down
Look at what is in the loft before you ask for a price. Wires, pipes and the water tank all need space, and lights fitted into the ceiling below can need clearance.
Mention these on the form. If you want a light up there, say so, because a carpenter will usually bring in an electrician for that part.
A loft that is turned into a bedroom or a study is a different, bigger job. Floors, stairs, insulation and fire safety all come under building regulations, and a loft conversion needs approval.
Lofts in Port Talbot houses
A great many Port Talbot houses are terraces and semis with a ridge roof and a small hatch on the landing. Check the hatch is big enough for the boards, which are often 1.2 metres long, or ask for shorter ones.
Damp air gets into a loft near the coast if it is not ventilated. Do not block the eaves with boards or boxes, so air can still move through.
Carpentry jobs in Port Talbot
- Door fittingInternal and front doors hung, frames mended, sticking doors eased.
- Stairs and handrailsNew handrails, spindles and balustrades, or a whole new staircase.
- Decking and garden timberDecks, steps, sheds and pergolas built from timber.
- Fencing and gatesFence panels, posts and gates put up straight and hung to close.
- Floorboards and skirtingCreaking boards fixed, rotten boards replaced, skirting and architrave fitted.
- Stud walls and framingTimber stud walls, boxing in and framing for extensions.
Parts of Port Talbot and nearby
Help with carpentry across the town and in the places listed here.
- Port Talbot town centre
- Aberafan (Aberavon) and the seafront
- Sandfields
- Taibach
- Margam
- Goytre
- Baglan
- Cwmafan
- Pontrhydyfen
- Briton Ferry
- Neath
What you can count on
- Free to ask. Sending the form costs nothing and you are never tied in. You can say no to any price.
- A short form. Name, phone number, which part of town and what needs doing. No email address and no house number needed.
- Prices from published guides. Each price shown was read from a published UK cost guide.
- Your details are used for one thing. They are used so a carpenter can ring you about your job. They are not sold.
Common questions
Can any loft be boarded?
Most can. A carpenter will want to check that the joists are sound and the right size, that there is no damp or rot, and that the hatch is big enough to get boards through.
Will boarding stop the loft being warm enough?
It can, if boards squash the insulation. A raised frame keeps the boards clear of it, so the insulation can do its job.
Get your loft working for you
Cardboard boxes in the spare room cost you space every day. A boarded loft takes them away, and it is cheaper than moving.
Say how big the loft is and where in Port Talbot you live. Asking is free.